5
THE CHIME FEATURE
If checked, your security system will operate in the "CHIME" mode, allowing the monitoring of
pre-designated zones while the security system is not armed. While in the "CHIME" mode, the
opening of any of these zones will produce a 1 second beep from the keypad control. To
activate this feature, press the "CHIME" digit which is the first digit of the Master Code. Five
seconds after pressing the "CHIME" digit, a one second tone will occur indicating that this
feature has been activated. Repeat this procedure to turn the "CHIME" feature off.
KEYPAD ACTIVATED PANIC/HOLD-UP ALARM
If checked, this feature has been selected by your installing company. If so, when the star [
U
]
and pound [#] keys are pressed at the same time for one second, a local audible alarm will
sound. If your system is connected to a monitoring center, an emergency report could be
transmitted to that center. These keys should only be pressed in an emergency situation
requiring immediate response by law enforcement personnel.
PLEASE NOTE: Some Panic/Hold-Up alarms are programmed to be silent at the protected site
while reporting an alarm to the monitoring center. Check with your installing company to
determine how your security system will respond to the Panic/Hold-Up activation.
KEYPAD ACTIVATED FIRE ALARM
If checked, this feature has been selected by your installing company. If so, you can activate
the Fire alarm by pressing the one [1] and three [3] keys at the same time for one second. If
your system is connected to a monitoring center, an emergency report could be sent to that
center. These keys should only be pressed in an emergency situation requiring response by
fire department personnel.
KEYPAD ACTIVATED AUXILIARY ALARM
If checked, this feature has been selected by your installing company. If so, you can activate
the auxiliary alarm by pressing the four [4] and six [6] keys at the same time for one second.
If your system is connected to a monitoring center, an emergency report could be sent to that
center. These keys should only be pressed in an emergency situation requiring response by
emergency personnel.
TELEPHONE LINE MONITOR
If checked, your installing company has selected the TELEPHONE LINE MONITOR which will
monitor your telephone line that links your security system to the monitoring station. When
selected, the loss of your telephone line will give either immediate, or delayed notification by
sounding the siren and/or keypad sounder. Check with the installing company listed on page
1 to find out if notification will be delayed or immediate, and what kind of sound will be created
in case of a telephone line fault.
www.ealarm.com.my
