background image

 

9

To set the oven for combi cooking using time

 

Activate the oven using the “On/Off touch pad” at the bottom of the control panel. 

 

Press the “Change set mode” touch pad to illuminate the “set temp” light next to the “Cavity” 
icon. 

 

Turn the “Time dial” to the desired cooking time.  

 

Set the “Climate % dial” to the desired % steam. 

 

Turn the “Temperature” dial to set the desired cooking temperature. 

 

Press “Manual start/stop” to start cooking. 

 

The oven will automatically turn off when the cooking time has elapsed.  

 

The Probe

 

You can set any internal product temperature between 32°F and 212°F ( 0°C and 100°C).  

 

When the probe is active you’ll see the “Prb” message on the time display.  

 

Turn the knob clockwise to set the temperature of the core temperature control probe. 

 

Position “Set Temp” shows the set temperature.  

 

The position “Actual Temp” shows the internal temperature of the food you are cooking.  

 

While the oven is working, the display continuously switches from the “Set Temp” to the 
“Current Temp” every 4 seconds. 

 

When the core temperature reaches the “Set Temp” the oven automatically goes to the next cycle 
if, one has been programmed in. If no other cycle has been programmed, the tone will sound and 
the oven will then end the cooking process.   

 

The probe will always be used with Delta T.  

  

To set the convection oven using the probe cooking

 

Activate the oven using the “On/Off touch pad” at the bottom of the control panel. 

 

Press the “Change set mode” touch pad to illuminate the “set temp” light next to the “Cavity” 
icon. 

 

Turn the “Temperature” dial to set the desired cooking temperature. 

 

Press the “Change set mode” touch pad to light the “Probe” icon. 

 

Insert the probe into the thickest part of the product being steamed. 

 

Set the desired finished internal product temperature.  

 

Press “Manual start/stop” to start cooking. 

 

The oven will automatically turn off when the set internal product temperature has been reached. 
[or go to the next programed cycle] 

 

To set the CAPO for combi cooking using the probe

 

Activate the oven using the “On/Off touch pad” at the bottom of the control panel. 

 

Press the “Change set mode” touch pad to light the “Probe” icon. 

 

Insert the probe into the thickest part of the product. 

 

Set the desired finished internal product temperature.  

 

Press the “Change set mode” touch pad to illuminate the “set temp” light next to the “Cavity” 
icon. 

 

Set the “Climate % dial” to the desired % steam. 

 

Turn the “Temperature” dial to set the desired cooking temperature. 

 

Press “Manual start/stop” to start cooking. 

 

The oven will automatically turn off when the set internal product temperature has been reached. 

 
 

To set the CAPO for steaming using the probe

 

Activate the oven using the “On/Off touch pad” at the bottom of the control panel. 

 

Press the “Change set mode” touch pad to light the “Probe” icon. 

 

Insert the probe into the thickest part of the product being steamed. 

 

Set the desired finished internal product temperature.  

Содержание CAPO-203














Отзывы: