background image

 

 

 

3

Your new appliance at a glance 
 
a) The control panel 

 

 

 

 
 

 

This model is equipped with Touch Control sensors allowing for easy and very convenient operation. By touching the 
sensor with your finger, the respective function is activated and verified by an audible acknowledgement signal.  

 

b) Initial operation 

Place the appliance on a heat-resistant, stable and flat working surface and do not operate it in the proximity of other 
appliances (electric stove, gas flame etc.). The space above the appliance must be free; the distance to any wall must 
be at least 4”. Unhindered air circulation must be ensured. 
Connect the appliance to the power supply. You will hear a short audible signal, all displays remain off. The appliance is 
in the stand-by mode. 

 

c) Switching on  

Place a suitable cooking utensil in the middle of the cooking surface and touch the main button until you hear an audible 
signal. All the segments of the power display as well as all the LED’s in the temperature display will flash up. Now you 
may choose to set either the power level or the temperature level by activating a button. 

If there is no further activation 

within 30 seconds, all displays will extinguish and the control switches into the stand-by mode. 

 

d) Switching off 

Touch the Main/On-Off button until you hear an audible signal and all the displays extinguish. Now the control is in the 
stand-by mode. During operation the control can be turned off at any time by pressing the main button even if other 
buttons have been activated. 
If the temperature on the cooktop has reached a value of more than 160°F due to the waste heat emitted by the pot, an 

H

 (for Hot) will appear in the 

POWER

 display. If the appliance is unplugged from the power outlet, this indication will 

extinguish. 

Note: It is normal for the fan to continue running in the stand-by mode after a long operation time. 

Timer display 

(cooking time) 

01-99 min. 

LED’s for  

Temperature levels 

70°C/160F – 230°C/

 

450

°

F

 

Main button 
(ON/OFF) 

Display of 

Power levels 

1-9 

Sensor for selecting the  

Temperature level 

Sensor for setting 

the Timer 

Sensor for 

selecting the Power level 

160oF

230

300

370

450oF

Содержание BIR-1C








Отзывы: