Cadac Travel Chef 8500, Инструкция пользователя

Страница: 7 / 9

12. Assembly ...../continue
Ÿ
Before using the appliance it is neccesary to fit the dome handle to the dome. This is easily done by screwing the threaded
stud underneath the handle into the nut, which is fixed to the top of the dome. Do not over tighten.
threaded stud
nut
Ÿ
The appliance is quickly and easily set up for use by following the steps below;
1. Take the BBQ out of it's carry bag.
2. Remove the fat pan and dome from the aluminium burner unit.
3. Flip the appliance over to expose the locking screws underneath the unit.
4. Turn the locking screws so that it clears the plastic base with no interference between the two
5. Lift the plastic base of the burner unit.
6. Flip the plastic base over and place it over the aluminium burner unit. Ensure it is correctly aligned.
7. secure the plastic base in position by turning the locking screws until they are located in the'V' , whick is situated in the
plastic base.
8. Turn the BBQ over and stand it on the plastic base.
9. Fit the fan pan to the unit by aligning the recess on the fatpan with the valve box, which forms part of the aluminium
burner unit.
10. Fit the desired cooking surface and the BBQ is ready to be used.
1 2 3
4 5 6
7 8 9