31
Camera shutter or flash not triggered with wired connection
(assuming laser is detected)
SENSOR LED STATUS
POSSIBLE CAUSES
SOLUTION
TRAP MODE:
STEADY GREEN REMAINS
1. NO OBJECT HAS
PASSED THROUGH
THE LASER BEAM
• RETRY WITH BIGGER
OBJECT TO INTERCEPT
THE LASER BEAM AT A
CLOSER DISTANCE WITH
EITHER THE EMITTER
OR THE SENSOR.
2. OBJECT MOVING
TOO FAST
• SWITCH THE EMITTER TO
1KHZ, RESET THE SENSOR
AND RETRY.
• USE MORE THAN ONE LV5
TO TRAP THE OBJECT.
ESCAPE MODE:
STEADY RED REMAINS
3. OBJECT STILL
INTERCEPTING THE
LASER BEAM
• CHECK THE LASER
BEAM AND REMOVE
ANY OBJECTS.
TRAP MODE:
TURNS RED (LASER IS
INTERCEPTED)
ESCAPE MODE:
TURNS ORANGE (LASER
IS DETECTED)
4. SHUTTER CABLE OR
X-SYNC CABLE
CONNECTION
PROBLEM
• ENSURE THE SHUTTER
CABLE OR X-SYNC
CABLE IS PLUGGED
IN SECURELY ON BOTH
ENDS.
5. CAMERA AF SYSTEM
DOES NOT FOCUS
• SET CAMERA TO MANUAL
FOCUS.
6. CAMERA DRIVE MODE
IS SET
INCORRECTLY
• ENSURE CAMERA IS
SET TO THE
CORRESPONDING DRIVE
MODES.
7. OBJECT MOVING
FASTER THAN
CAMERA’S RESPONSE
TIME
• SET CAMERA TO MANUAL
FOCUS.
• SET FREEZE TIMER IN
SINGLE SHOT TO PROLONG
SHUTTLE SIGNAL FOR
YOUR CAMERA. SEE
SECTION 8.9.
Содержание Laser Trigger LV5
Страница 1: ...User Manual Laser Trigger LV5...
Страница 2: ......
Страница 39: ......
Страница 40: ...www cactus image com...