PREPARING FOR USE
ELECTRO BUDS
1. When fully charged, remove the handset from the charging station and
remove the cap.
2. Prepare the Electro Buds to be inserted into each of the 4 probes:
2.1 Remove an Electro Bud from its protective packaging.
2.2 Hold the Electro Bud with the coloured ring tip upwards (see fig.6 step 1).
2.3 Bend the coloured ring tip until the tip snaps off
(as shown in fig.6 step 2).
2.4 The serum will release and flow to the opposite cotton bud tip.
2.5 Hold the plastic stem and gently bend by approx 45° degrees.
This prevents Electro Buds from falling out of the probes
when inserted (see fig.6 step 3).
2.6 Once the serum has completely filled the cotton bud tip,
insert the Electro Bud into one of the probes
(see fig.6 step 4).
2.7 Repeat steps 2.1 to 2.6 for the other probes.
3. When Electro Buds have been
inserted to all 4 probes, press
and hold the Power button on
the handset until the LCD display
comes on (see fig.5).
Fig.6
11
10
Electro Buds are unique serum filled cotton buds that have been specifically
developed for use with CACI facial toning technology.
Each Electro Bud contains an instant skin firming serum with conductive
properties that enhance the transmission of the electrical impulses delivered by
the CACI Microlift system.
SNAP
FLOW
1
2
Electro Buds can be purchased from the supplier of your CACI Microlift system
or online at www.cacimicrolift.com
NOTE:
Ensure Electro Bud tips are completely filled and moist before
inserting to probes and commencing treatment.
NOTE:
If the Electro Bud tips become dry, moisten with water. When the
Electro Bud serum has been completely absorbed or the Electro Buds
become worn, replace with new ones.
Содержание Microlift
Страница 1: ...USER GUIDE ...
Страница 16: ...NOTES NOTES 30 31 ...
Страница 17: ...CACI Microlift Limited Herts WD6 3FG United Kingdom www cacimicrolift com MS33 UG03 14 ...