- 2 -
Cabstone
TM
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2017-06-28
V2.0
EN
45206, 45207, 45208, 45209
User Manual
Fast charge car USB chargers
1 Safety Instructions
1.1 General
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important informati-
on for correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the
product.
•
Do not open the housing.
•
Do not let the product unattended in use.
• Only let a trained electrical engineer do installation, disas-
sembling, maintenace and repairing work.
•
Compare the specifications of product, power supply and
peripherals. These must be identical.
• Not meant for children.
•
Do not repair defective products by yourself, but contact the
dealer or producer.
•
Do not modify or alter product nor accessories.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
•
Only use in dry ambience.
•
Risk of injury by stumbling and falling
•
Do not rotate in inserted state.
•
Short circuit to ground - Do not connect already connected
devices to other interfaces of the vehicle simultaneously.
2.2
Warning levels
Warnings against hazards that may result in
injuries
in case
of
non-observance.
Warnings against hazards that may result in
material
damage
in case of non-observance.
2
Description and Function
2.1
Fast Charge car USB chargers
This product is a Fast Charge car USB charger for charging and operating mobile
USB devices. It converts board voltage into individual low voltage.
45206 45207 45208 45209
Fig. 3:
Fast Charge car USB chargers
2.2
Scope of delivery
Fast Charge car USB charger, user manual
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparing
•
Compare voltage, mains voltage and frequency of product
and
mains.
•
Do not overload the product and attend to its name plate.
5
Connecting and Operating
Risk of injury by stumbling and falling
•
Ensure safe cable laying.
12/24 V
Fig. 4:
Connecting
1.
Connect mobile USB devices to the Fast Charge car USB
charger
via charging cable.
2.
Plug the USB car charging adapter into a board socket.
3.
Turn on the ignition. (depends on car model)
4.
Unplug all connections after use.
Charging cables are not included.
The product contains no operating elements to handle during use.
6
Specifications
Art.
45206
45207
45208
45209
Connections
Car plug,
USB-A (QC3.0)
Car plug,
USB-A (QC3.0),
USB-A (Smart ID)
Car plug,
USB-A (QC3.0),
USB-C
Car plug,
1x USB-A
(QC3.0),
3x USB-A
(Smart ID)
Input
12/24 V
,
2 A max.
12/24 V
,
3 A max.
12/24 V
,
3.5 A max.
12/24 V
,
4.5 A max.
Output
QC3.0: Device recognition, downwards compatible
QC2.0/1.0:
QC3.0 (orange socket):
3.6-6.5 V
, 3 A /
6.5-9.0 V
, 2 A /
9-12 V
, 1.5 A
USB-C:
5 V
, 3 A max.
Smart ID:
5 V
, 2.4 A max. per output
Max. power
3 A
4.8 A
6 A
7.2 A
Protection level
IP20
Dimensions
62.6 x 27.5 x 24.8 mm
63.6 x 37 x 24.8 mm
Weight
19 g
22.5 g
28.4 g
31 g
Tab. 2:
Specifications
7
Maintenance and Cleaning
The products are maintenance-free.
Material damage
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
• Store the product out the reach of children and in a dry and
dust-protected ambience when not in use.
• Keep and use the original packaging for transport.
8
Liability notice
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current
form under the given contact details.
9
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
10
EU Declaration of Conformity
With the CE sign, Cabstone
TM
, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.