Mount TV Rails To The Back of Your Flat Panel TV/Monitor
Make sure the
TV Rails
(B and C) are mounted at an equal distance from the top of the
TV/monitor, and close to the center as possible as shown in diagram 2-A below. Knobs should
face the outside of the television. M4, M5, M6, and M8 bolts are provided. Other sizes are
available at your local hardware store.
Plastic Spacers
(I) are provided for use with M4, M5, M6,
and M8 bolts. TV mount bolts on TVs with curved or recessed back panels as shown in diagram
2-B. If you are mounting to a television/monitor with a flat back you will not need a plastic
spacer as shown in diagram 2-C.
Make sure these bolts are right!
Some televisions and
monitors have shallow threaded inserts. We have provided 4 extra washers you may use to
offset this if the provided bolts are too long.
Hang the TV Onto The Wall Plate
Hook the
TV Rails
(B and C) over the top of the
Wall Plate
(A) as
shown in diagram 3-A. Then tighten the safety screws as shown
in diagram 4-B.
Diagram 3-A
5
