Cabletron Systems SynOptics 3000 Series Скачать руководство пользователя страница 59

Страница: 59 / 101

FDDI Configuration

SynOptics FDDI NMM SRF Event Counters View

Configuration Views

SynOptics Series 3000 Hub

3-16

Management Module Guide

Worst Error Monitor Operational State
The operational state of the agent worst error monitor process.

Station ID
Station Id of the station with the worst LER errors and Frame errors.

Port w/Worst LER
The port on this station with the worst rate of LER errors.

LER Estimate
The worst LER estimate (long term average link error rate) on the above port.

MAC w/Worst Frame Error Rate
The MAC on this station with the worst rate of frame errors.

MAC Ratio
The worst ratio of frame errors on the above MAC. This value will be between
0 and 65535.

SynOptics FDDI NMM SRF Event Counters View

This view provides LAN statistics informtion fo rhte whole LAN. It provides
informtion about each station’s conditions, events, and worst error rates on
MACs and ports. It is indexed by station.

SRF Monitor Operational State
Indicates the operating status of this station (On or Off).

Station ID
Station ID of the station with the indicated conditions and events.

MAC Neighbor Changes
Number of times this station sees a MAC neighbor change.

MAC Path Changes
Number of times this station sees a path change on one of its MACs.

Port Undesired Connects
The number of times and undesired connection is attempted on this port.

Port Path Changes
The number of times this port changes path.

SynOptics FDDI NMM SRF Condition View

This view provides the following SRF condition information:

SRF Monitor Operational State
Indicates the operating status of this station (On or Off).

Содержание SynOptics 3000 Series






































































































Результаты поиска

Содержание SynOptics 3000 Series

Отзывы:

Похожие инструкции для SynOptics 3000 Series

Бренды по названию

Популярные бренды

Cabletron Systems SynOptics 3000 Series, Руководство пользователя

Результаты поиска

Содержание SynOptics 3000 Series

Отзывы:

Похожие инструкции для SynOptics 3000 Series

Бренды по названию

Популярные бренды