Cabletron Systems SWPIM-DDS, Руководство по установке

Страница: 27 / 30

SWPIM-DDS Installation Guide A-1
APPENDIX A
SPECIFICATIONS
This section describes the environmental specifications and safety and
approval requirements for the SWPIM-DDS. Cabletron Systems reserves
the right to change these specifications at any time without notice.
A.1 PHYSICAL PROPERTIES
A.2 NETWORK INTERFACE
The WAN connection can be seen in Figure A-1 .
Figure A-1 RJ48 Pinout
The SWPIM-DDS uses an RJ48 connector for the network port that
supports the pin assignments in
Table A-1 . The pinouts are designed
according to USOC RJ48S.
Dimensions: 1.91 H x 5.40 W x 19.05 D (cm)
0.75 H x 2.125 W x 7.50 D (in)
Weight (Unit): .068 kg (0.15 lb)
Nominal current draw on +5V
supply from host platform:
165 mA
MTBF (Predicted): 9,678,856 hours
1 2 3 4 5 6 7 8
strj45