PN 9031355-01
Page 2
Channel Assignment for Individual TPXMIM Ports
At the MIB navigator
prompt:
MIBNav-
>
1. Enter the following command (refer to
Note
on page 1):
For EMME:
set /1/3/6/1/4/1/52/1/6/1/2/3/1/1/3/
MMAC Slot # [TPXMIM Port #] Integer
For EMM-E6:
set /1/3/6/1/4/1/52/4/1/2/4/1/2/1/1/3/
MMAC Slot # [TPXMIM Port #] Integer
The following table provides the channel-to-integer association:
Example:
In an MMAC with an EMME, a TPXMIM in slot
5
could be sent the following command to direct all
TPXMIM port
4
traffic to Channel B (
2
):
set /1/3/6/1/4/1/52/1/6/1/2/3/1/1/3/
5
[
4
]
2
2. Press the
return
key. If the device accepts the integer entry, no error messages display.
If the module does not accept the entry, and an error message displays, start with step 1 again and enter the
information. If the module still refuses to accept the entry, contact Cabletron Systems Technical Support.
Getting Help
If you have questions, or need additional help, refer to the following and contact Cabletron Systems Technical Support:
© Copyright April 1997 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005
All Rights Reserved
Printed in the United States of America
Order Number: 9031355-01 April 1997
EMME
,
EMM-E6
,
MMAC
, and
TPXMIM
are trademarks of Cabletron Systems, Inc.
CompuServe
is a registered trademark of CompuServe.
The information in this document is proprietary and is not to be copied in any form, or by any means, without the
written consent of Cabletron Systems.
MMAC
Channel
OID Integer
(Instance)
A
1
B
2
C
3
Phone
(603) 332-9400
Monday – Friday; 8
A
.
M
. – 8
P
.
M
. Eastern Time
CompuServe
GO CTRON from any ! prompt
Internet mail
FTP
ctron.com (134.141.197.25)
Login
anonymous
Password
your email address
BBS
(603) 335-3358
Modem setting
8N1: 8 data bits, No parity, 1 stop bit
For additional information about Cabletron Systems products, visit our
World Wide Web site: http://www.cabletron.com/