Cabletron Systems SmartSwitch 6500, Обзор и руководство по установке

Страница: 26 / 50

Chapter 3: 6C110 Setup
3-2 6C110 Overview and Setup Guide
4. Remove the accessory package.
5. Remove the Electrostatic Discharge (ESD) Wrist Strap package.
6. Remove the Console Cable Kit and set aside.
3.2 SETTING UP THE 6C110
The following subsection describes the procedures that must be followed
to complete the installation of the 6C110.
3.2.1 Installation Order
Once a suitable site has been chosen, the 6C110 can be installed. The
chassis can be freestanding or rack mounted.
It is recommended that the 6C110 installation proceed in this order:
1. Install the cable management bar.
2. Mount the chassis to a 19-inch rack or other secure location.
3. Attach the Electrostatic Discharge Wrist Strap.
4. Remove the power bridge adapter, (if applicable).
5. Install the Power Supply Module(s).
6. Install the Interface Modules.