manualshive.com logo in svg

Cabletron Systems SmartSwitch 2200, Инструкция по установке и эксплуатации, Страница: 43 / 64

Поделиться
Скачать
Cabletron Systems SmartSwitch 2200 Скачать руководство пользователя страница 43

Using LANVIEW

Troubleshooting

4-3

CPU

Off

Power off.

Power up device.

Red

Blinking. Hardware 
failure has occurred.

Contact Cabletron Systems for technical 
support.

Solid. Resetting, normal 
power up reset.

If the LED remains red for several minutes, 
contact Cabletron Systems for technical 
support.

Amber

Blinking. Crippled. 

Contact Cabletron Systems for technical 
support.

Solid. Testing.

If the LED remains amber for several 
minutes, contact Cabletron Systems for 
technical support.

Green

Solid. Functional.

None.

Amber 
and 
Green

Booting. Blinks amber 
and green while booting.

None.

RX

(Receive)

Off

No link. 

No activity or port in 
standby. Port enabled or 
disabled.

None.

Green

Solid. Link, port enabled, 
no activity.

None.

Blinking. Link, port 
disabled.

None.

Amber

Flashing. Link, port 
enabled, activity.

None.

Red

Solid. Diagnostic failure.

Contact Cabletron Systems for assistance.

Table 4-1

LANVIEW LEDs (Continued)

LED

Color

State

Recommended Action

Содержание SmartSwitch 2200

































































Отзывы:

Нет отзывов