Supplemental Software User Guide
11
SAP address is required. If the LLC2 session will be run over a native LLC2 frame
relay interface, the parameter will be ignored.
Local MAC Address
identifies the PU to the host. Like the local SAP address, this parameter is relevant
only in a connection to a 3174 or AS/400-type setup where a specific source MAC
address is required. If the LLC2 session will be run over a native LLC2 frame relay
interface, the parameter will be ignored.
PU Type
is SDLC or LLC2.
Function Key Operations
Pressing one of the function keys listed below will perform the appropriate operation
from the PU Status panel:
[PF1]
Help
– will display the Help panel (Figure 2).
[PF2]
Exit
– will return you to the PU Status panel (Figure 4).
[PF3]
End
– will ask whether you want to commit the changes, which will
update the Cabletron device database values. After you select
Yes
or
No
,
you will be returned to the Main Status panel (Figure 1).
Moving the cursor to a parameter and pressing a supported function key gives you
these additional options:
[PF6]
Modify
– will allow you to change the configured values of the
parameter, if the parameter is displayed in green.
[PF7]
Act
– will activate the line.
[PF8]
Deact
– will de-activate the line.
[PF10]
Display
– will display output from the runcmd.
[PF11]
Refresh
– will re-display the screen with updated values.
