Cabletron Systems SmartSTACK ELS100-S24TX2M, Руководство по управлению

Страница: 9 / 102

9033259
Management Overview 9
1. MANAGEMENT OVERVIEW
Configuration Options
For advanced management capability, the ELS100-SMGMT
SmartSTACK Management Module provides a menu-driven system
configuration program. This program can be accessed by a direct or
modem connection to the serial port on the Management Module (out-of-
band), or by a Telnet connection over the network (in-band).
The Management Module is based on SNMP (Simple Network
Management Protocol). This SNMP agent permits a switch stack to be
managed from any PC in the network using in-band management
software (such as Cabletron’s SPECTRUM).
The Management Module also includes an embedded HTTP Web agent.
This Web agent can be accessed using a standard Web browser from any
computer attached to the network. Refer to the Web Management Guide
for more information.
The system configuration program and the SNMP agent support
management functions such as:
•
Enable/disable any port
•
Set the communication mode for any port
•
Configure SNMP parameters
•
Select RMON options
•
Display system information or statistics
•
Configure the switch to join a Spanning Tree
•
Download system firmware
•
Restart the system
Required Connections
Console Port (Out-of-Band) Connections
Attach a VT100 compatible terminal or a PC running a terminal emulation
program to the serial port on the Management Module. Use the null-
modem cable provided with this package, or use a null-modem
connection that is compatible with the Console port pin assignments
shown in Appendix A of the ELS100-S24TX2M User Guide.
When attaching to a PC, set terminal emulation type to VT100, specify the
port used by your PC (i.e., COM 1~4), and then set communications to 8
data bits, 1 stop bit, no parity, and 19200 bps (for initial configuration).