Cabletron Systems MRXI 10BASE-T, Руководство пользователя

Страница: 10 / 35

ATTACHING THE CONSOLE
Page 2-1
CHAPTER 2
ATTACHING THE CONSOLE
This chapter describes information on the characteristics of supported
terminals, configuring the management console and connecting the
console cabling.
2.1 LOCAL MANAGEMENT CONSOLE
MRXI/LM is accessed by attaching a management console at the DB-9
CONSOLE port on the rear panel of the MRXI (see Figure 2-1). The
console connection supports a Digital Equipment Corporation VT200™
or VT300™ series terminal or PC emulation of one of these terminals.
Figure 2-1. Management Console Connection
Table 2-1 lists the setup requirements for the local management
console. If your terminal is a Digital Equipment Corporation VT200™
or VT300™ series terminal, press
F3 to access the Setup Directory. If
you have a terminal emulation of the Digital Equipment terminals,
refer to your equipment user manual for setup procedures.
MRXI
10BASE-T
HUB
A
MANAGEMENT
TERMINAL
CONSOLE
CABLE
DB-9
CONSOLE PORT