Cabletron Systems MMAC-Plus 9E312-12 Скачать руководство пользователя страница 4

 

 3

Appendix

 

Full Duplex Configuration Screen

 

The 9E312-12 Full Duplex Configuration Screen displays the port number, operation 
mode, link status, and port status of the module’s 12 ports.

 

Figure 1. 9E312-12 Full Duplex Configuration Screen

                         MMAC-Plus  LOCAL MANAGEMENT

                          Full Duplex Configuration

    Module Name: 9E312-12                        Firmware Revision: 01.00.23B

    Slot Number: 10                              BOOTPROM Revision: 01.00.03

     PORT#       OPERATION MODE       LINK STATUS       PORT STATUS

        1         STANDARD ENET         Link             ENABLED

        2         STANDARD ENET         Link             ENABLED

        3         STANDARD ENET         Link             ENABLED

        4         STANDARD ENET         Link             ENABLED

        5         STANDARD ENET         Link             ENABLED

        6         STANDARD ENET         Link             ENABLED

        7         STANDARD ENET         Link             ENABLED

        8         STANDARD ENET         Link             ENABLED

        9         STANDARD ENET         Link             ENABLED

       10         STANDARD ENET         Link             ENABLED

       11         STANDARD ENET         Link             ENABLED

       12         STANDARD ENET         Link             ENABLED

  SAVE           SET ALL PORTS: FULL                               RETURN

Содержание MMAC-Plus 9E312-12










Отзывы: