background image

 

QR-3

 

QR.2

LED FUNCTIONS

 

Consult the diagram to help interpret LED indications.

 

MCC-CRIO LEDs

 

PWR - Power

 

The 

 

PWR

 

 LED remains lighted GREEN during normal operation, 

indicating the reception of power. If the LED is off, the MCC-CRIO is not 
receiving power.

 

Configuration

Switch Settings

 

Connect the RI of the 
MCC-CRIO to the RO of a 
Cabletron device.

1 – On (Default setting)
3 – On (Default setting)

Connect the RO of the 
MCC-CRIO to the RI of a 
Cabletron device.

2 – On (Default setting)
4 – On (Default setting)

Connect the RI of the 
MCC-CRIO to the RO of another 
vendor device.

1 – On
3 – Off

Connect the RO of the 
MCC-CRIO to the RI of another 
vendor device.

2 – On
4 – Off

MCC-CRIO

R
O

R

I

P
1

P
2

P1

RI

16 Mb

PWR

P2

RO

P1

RI

16 Mb

PWR

P2

RO

Содержание MCC-CRIO

Страница 1: ... Number 9032130 01 July 1997 The Complete Networking Solution SW1 Settings On Enable RI port Off Disable RI port On Enable RO port Off Disable RO port On Enable autowrap on RI Off Disable autowrap on RI On Enable autowrap on RO Off Disable autowrap on RO 1 2 3 4 for connection to Cabletron devices for use with other vendor devices for connection to Cabletron devices for use with other vendor devic...

Страница 2: ...on devices to the RI RO ports You must disable autowrap to connect the RI RO ports to the devices of other vendors Ring Speed Setting Put Jumper P1 Sleeve Over 16 Mbps Pins 1 and 2 Default setting 4 Mbps Pins 2 and 3 NOTE Autowrap must be enabled at both ends of the cable Ensure that the Cabletron device at the other end has autowrap enabled CAUTION If autowrap is disabled a beaconing condition ma...

Страница 3: ...uration Switch Settings Connect the RI of the MCC CRIO to the RO of a Cabletron device 1 On Default setting 3 On Default setting Connect the RO of the MCC CRIO to the RI of a Cabletron device 2 On Default setting 4 On Default setting Connect the RI of the MCC CRIO to the RO of another vendor device 1 On 3 Off Connect the RO of the MCC CRIO to the RI of another vendor device 2 On 4 Off MCC CRIO R O...

Страница 4: ... And RO Ports The RI and RO LEDs indicate the status of the RI or RO port as described in the table below LED Activity Meaning GREEN Phantom current present port inserted OFF No phantom current present port wrapped Blinking RED Speed fault condition caused the port to wrap LED Activity Meaning GREEN Active port open Blinking GREEN Autowrap condition port wrapped OFF No activity port wrapped Blinki...

Отзывы: