Page 3 - 3
INSTALLATION
NOTE: The SQE test function must be disabled if you
are connecting the transceiver to Ethernet Version 1
equipment or to a repeater.
Set the SQE Switch as follows:
•
To disable the SQE test function, set the switch
(Fig. 3-1) towards the optical ports to the off (o)
setting.
•
To enable the SQE test function, set the switch
(Fig. 3-1) away from the optical ports to the on (
•
)
setting on the label.
Figure 3-1. SQE Switch
LNK
LNK
CLN
CLN
RCV
RCV
X M T
X M T
SQE
SQE
PWR
PWR
S Q E
S Q E
SQE SWITCH
SQE SWITCH
SQE ENABLED
SQE ENABLED
SQE DISABLED
SQE DISABLED
TX
TX
R X
R X
1300nm
1300nm
