manualshive.com logo in svg

Cabletron Systems ESXMIM, Руководство по управлению, Страница: 60 / 86

Поделиться
Скачать
Cabletron Systems ESXMIM Скачать руководство пользователя страница 60

Chapter 11: The Interface Statistics Screen

Page 11-2

ESXMIM/ESXMIM-F2 Local Management Guide

11.1

INTERFACE STATISTICS SCREEN FIELDS

The following list describes the Interface Statistics screen fields:

In Octets

This field displays the number of octets (bytes) received by the interface.

In Unicast Pkts

This field displays the number of unicast packets (packets destined for 
one specific address) received on the interface.

In Nonucast Pkts

This field displays the number of non-unicast packets (multicast and 
broadcast packets; packets destined for more than one address) received 
by the interface.

In Discards

This field displays the total number of packets discarded by the interface 
due to a lack of available resources.

In Errors

This field displays the total number of errors received on the interface. 
The number displayed in the In Errors display field can be composed of 
the following errors:

•

Out Of Window (OOW) collisions - Collisions caused by a station 
on the network violating Carrier Sense and transmitting at will, a 
cable failure occurring during the transmission of a packet, or 
network propagation delay greater than 51.2 

µ

s.

•

Cyclical Redundancy Check (CRC) errors - Errors in the 4-byte 
CRC field of a packet which ensures that the data received by the 
ESXMIM is the same as the data transmitted by the originating 
device.

NOTE

For interface 7, the BRIM port, the In Discards field displays 
the number of times the ESXMIM had to discard packets - any 
number of packets - received on the interface.

Содержание ESXMIM























































































Отзывы:

Нет отзывов