Cabletron Systems EMC39-12 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 39

Cabletron Systems EMC39-12 Скачать руководство пользователя страница 27

EMC39-12 User’s Guide

A-1

APPENDIX A

CABLE REQUIREMENTS

This appendix gives cable requirements for each of the EMC39-12 ports.

A.1

10BASE-T TWISTED PAIR REQUIREMENTS

When a 10BASE-T twisted pair segment is connected to the EMC39-12,
the device at the other end of the twisted pair segment must meet IEEE
802.3 10BASE-T specifications.

The 10BASE-T twisted pair segment must meet the following
requirements:

Segment Length

The IEEE 802.3 10BASE-T standard requires that 10BASE-T devices
must be able to transmit from 0 to at least 100 meters (328 feet) per
segment of 24-gauge Unshielded Twisted Pair (UTP) cable.

Insertion Loss

The maximum insertion loss allowed for a 10BASE-T segment is 11.5 db
at all frequencies between 5.0 and 10.0 MHz. This includes the
attenuation of the cable, connectors, and patch panel.

Impedance

The IEEE 802.3 10BASE-T standard specifies cable impedance between
85 and 110 ohms.

A.2

SINGLE MODE FIBER OPTIC NETWORK

When connecting a single mode fiber optic link segment to a hub, ensure
the network meets the following requirements:

Cable Type

Fiber optic link segments should consist of 8/125 to 12/125

µ

m single

mode fiber optic cabling. 50/125 to 62.5/125

µ

m multimode cable may

also be used, however, multimode cable has greater optical loss, and
limits the possible distance to 2 km.

«
...
25
26
27
28
29
...
»

Содержание EMC39-12








































Отзывы:

Нет отзывов