Cabletron Systems BRIM-A6DP Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 66

background image

Chapter 3: Local Management

3-6

BRIM-A6DP User’s Guide

VPI

This field displays the Virtual Path Identifier (VPI) of the connection. This
field reads 0.

VCI

This field displays the Virtual Channel Identifier (VCI) of the connection.
This field reads between 1 and 1023.

Encapsulation Type

This field displays the type of Encapsulation being used to switch
Ethernet frames to ATM cells. The four possible options for this field are
as follows:

•

VC MUX 802.3 LANE -

VC Based Multiplexed 802.3 LAN

Emulation. This method is specified by the ATM Forum LAN
Emulation specification. This option is available for SVCs only.

•

VC MUX 802.3 -

VC Based Multiplexing for Bridged Protocols as

defined by the IETF RFC 1483.

•

LLC Encapsulated -

Logical Link Control for Bridged Protocols as

defined by the IETF RFC 1483.

•

N/A -

This encapsulation type signifies channels that are reserved for

UNI signalling or LAN Emulation control information.

AAL Type

This field displays the ATM Adaptation Layer being used by the
BRIM-A6DP. This field displays “3/4” or “5”.

Oper. Status

This field displays the operational status of the Virtual Channel
Connection (VCC). This field displays “Enabled” or “Disabled”.

[Port 1]

This field allows the user to toggle between each APIM installed in the
BRIM-A6DP, displaying the current connections on each APIM
respectively.

[6-10]

This field opens the next screen if the BRIM-A6DP has more than five
current connections. To toggle through the available connections use the
SPACE bar to select the group of five connections you wish to view.

«
...
26
27
28
29
30
...
»

Содержание BRIM-A6DP



































































Отзывы:

Нет отзывов

Похожие инструкции для BRIM-A6DP

Vb-C60 - Ptz Network Camera

Бренд: Canon Страницы: 30

Бренд: XMG Страницы: 5

Бренд: Habitat Страницы: 48

Бренд: NAD Страницы: 2

Бренд: Paradyne Страницы: 20

Compshere 3000 Series

Бренд: Paradyne Страницы: 2

Бренд: Pantech Страницы: 17

Бренд: NEC Страницы: 6

Бренд: Maxim Страницы: 26

Бренд: NetComm Страницы: 3

NI WLS/ENET-9163

Бренд: National Instruments Страницы: 36

Бренд: MC Страницы: 21

Бренд: Galaxy Страницы: 30

Бренд: CNC4PC Страницы: 11

Бренд: SriHome Страницы: 12

Бренд: ZALMAN Страницы: 18

Бренд: Procool Страницы: 2

Acme Packet 3900

Бренд: Oracle Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды