Cabletron Systems Access Server 316 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 70

Cabletron Systems Access Server 316 Скачать руководство пользователя страница 3

i

Notice

Notice

Cabletron Systems reserves the right to make changes in specifications and other information
contained in this document without prior notice. The reader should in all cases consult Cabletron
Systems to determine whether any such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT,
SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED
TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION
CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN ADVISED OF, KNOWN, OR
SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

© July 1999 by:

Cabletron Systems, Inc.
35 Industrial Way
Rochester, NH 03867

All Rights Reserved
Printed in the United States of America

Order Number: 9032858

Cabletron

Systems

is a registered trademark of Cabletron Systems, Inc.

DEC

,

DEChub

,

DIGITAL

, and the

DIGITAL

logo

are trademarks of Compaq Computers, Inc.

Ethernet

is a trademark of Xerox Corporation.

All other trademarks or registered trademarks are the property of their respective holders.

«
1
2
3
4
5
...
»

Содержание Access Server 316







































































Отзывы:

Нет отзывов