manualshive.com logo in svg

Cabletron Systems 2H23-50R, Руководство пользователя, Страница: 154 / 182

Поделиться
Скачать
Cabletron Systems 2H23-50R Скачать руководство пользователя страница 154

Chapter 5: Local Management

5-104

2H23-50R/2H33-37R User’s Guide

soft_reset

Syntax:

soft_reset

Description:

This command restarts the software image, 
which restores the user configuration settings 
from NVRAM. The user will be queried to 
confirm the reset command to ensure against 
unwanted resets.

Options:

Not Applicable

Example:

telnet:

Syntax:

telnet [IP address] [Port #]

Description:

The telnet command allows the user to 
communicate with another host (that supports 
Telnet connections) using the Telnet protocol. 
The user must specify the remote host using its 
IP address. The [IP address] field is mandatory. 
If no Port number is specified, telnet will 
attempt to contact the host at the default port.

Options:

Not Applicable

TIP

The Network Tools connection to the device will be terminated 
upon execution of this command.

-> soft-reset

22511-76

Содержание 2H23-50R























































































































































































Отзывы:

Нет отзывов