Cabletech URZ0158, Руководство пользователя

Страница: 17 / 40

17
Owner’s manual
EN
3.6 Network setup
Enter the “Network” screen from “Main Menu” →“Advanced”, as shown below:
TYPE: with 3 options: static configuration, DHCP and PPPOE
Media port: the port number used in the private protocol communication betwe -
en the DVR and the PC end, usually being 9000 by default. If this port of the PC
is occupied by any other service, please modify it to an unused port.
WEB port: the http port, usually being 80 by default. If the administrator modi -
fies the WEB port to any other port, such as 88, you have to postfix the IP with
the port number, and enter “http://192.168.1.19:88” in the address bar when ac -
cessing the DVR via the IE.
IP address: allocating an IP address depending on the network environment
of the DVR.
Subnet mask:
filling in a subnet mask in depending on the network environ -
ment of the DVR.
Gateway:
Setting the gateway depending on the network environment of the
DVR. If there is no router device in the network, please allocate an IP address
on the same network segment. If there is a router device in the network, you
have to set the corresponding gateway.
DNS: setting the IP address of the domain name server (DNS varies from city to
city), you can refer to the domain name server configurations of the PC.
UPNP: When the UPNP function is on(UPNP function on the router end is also
on of the router setting), then the DVR will reflect the port and IP into the router
automatically.