Cables to Go ZRC0104C Скачать руководство пользователя

Страница: 14 / 63

Page

SERIES power adapter into the power outlet.

Step 3. It takes around 15 seconds to reset. The

Power LED

will turn on Green initially. Wait for

it becomes Red then release the

Reset

button.

Step 4. Try to connect

http://192.168.1.1/

via your Web browser. Use the user name “

admin

” and

the password “

admin

” to obtain authentication. If it is failed, please try the approach

again.

4. Power Connector

Power connector connects your ZSR0104C SERIES to the power adapter. When ZSR0104C

SERIES is connected to the correct power adapter and the power adapter is plugged into a power

outlet, the Power LED will be on and ZSR0104C SERIES will boot and start operating.

Chapter 3 Install Your ZSR0104C SERIES

3.1 Connect Client PC to ZSR0104C SERIES

Use an Ethernet cable to connect your client PC to ZSR0104C SERIES local LAN port.

ZSR0104C SERIES supports auto-crossover, so you can use either a Straight-

Through cable or a Crossover cable to connect the client PC to the LAN port.

3.2 Connect Ethernet Hub/Switch to ZSR0104C SERIES

If you have more than four clients, try to connect the hub or switch to ZSR0104C SERIES LAN

port with an Ethernet cable, then connect each client PC to a hub or switch with an Ethernet cable,

too.

3.3 Connect Wireless Access Point to ZSR0104C SERIES

You can extend the wired LAN by connecting Wireless Access Point to ZSR0104C SERIES LAN

port. Then a wireless network will be set up and it will turn into an infrastructure mode. The whole

network coverage will be expanded by Access Point wireless connection to the wireless clients.

3.4 Connect Cable/xDSL Modem to ZSR0104C SERIES

Use the Ethernet cable to connect a Cable Modem or xDSL Box to ZSR0104C SERIES Internet

Содержание ZRC0104C
































































Результаты поиска

Содержание ZRC0104C

Отзывы:

Похожие инструкции для ZRC0104C

Бренды по названию

Популярные бренды

Cables to Go ZRC0104C, Руководство пользователя

Результаты поиска

Содержание ZRC0104C

Отзывы:

Похожие инструкции для ZRC0104C

Бренды по названию

Популярные бренды