Cables to Go DOCSIS Cable Modem, Руководство пользователя

Страница: 21 / 33

DOCSIS 1.0/ 1.1 Equivalent Cable Modem
Section 2: Troubleshooting Network Problems
If you have been referred to this section from one of the paragraphs above then there is
a possible problem with your cable network. Contact your CATV ISP to check if the
network is functioning correctly. If the network is functioning correctly then there is
likely a problem with your cable modem. Contact your CATV ISP.
Section 3: Troubleshooting User Application Problems
Question 7: If CATV ISP provides one IP address only, how do I switch CPE?
Answer:
Possible Solutions:
You may switch CPE in two ways:
1. On same computer, switch between Ethernet and USB interfaces
2. Switch from A computer to B computer
No matter how you switch CPE, please be noted that this cable modem is following
with DOCSIS specification definition. The DOCSIS rules if changing to the other
CPE device, the cable modem learned original CPE information can't be replaced.
You have to do
restart (power cycle) or reset the cable modem and follow with the
Ethernet or USB installation to set up your cable modem.
Question 8: How to Offer Multiple Users to Operate on One Cable Modem
Answer:
Possible Solutions:
1. Connecting to 2 Computer Devices through Ethernet and USB Interfaces:
This cable modem provides you the feature for Ethernet and USB interfaces to
operate on 2 different computer devices simultaneously. However, you have to
obtain additional IP addresses from your CATV ISP.
2. Connecting to More Than one Computer Devices through Ethernet Interface
using an External Hub:
The Cable Modem can simultaneously support up to 15 host devices. The actual
number may be limited by your CATV ISP. If your CATV ISP allows you to use
multiple IP addresses, you may attach multiple computers or other IP devices using
an external hub.
Question 9: How to check if the USB Installation is completed?
Answer:
Using USB with the Windows 98 or Windows Me Operating System
1. Click Network on Control Panel, make sure USB Cable Modem is installed
17