Component Video/Digital Audio CAT5 Extender
1. Turn off all power to equipment prior to installing this
product.
2. Make all CAT-5 connections using the components shown
in the diagram above.
3. Do not share any other signals on the CAT-5 cable other
than signals being extended by the CAT-5 baluns.
4. Terminate all cables as straight through T-568A terminations.
5. Using the appropriate interconnect cables, connect both
the source and the destination equipment to each of the
CAT-5 baluns.
6. Once all connections have been made, power on the
equipment again.
SPECIFICATIONS:
Interface:
Video: 3 * RCA (Y/Pb/Pr) female connectors
Digital audio: 1 * RCA female connector
UTP: RJ-45 connector
Impedance:
Video: 75 ohm unbalanced
Digital audio: 75 ohm unbalanced
UTP: 100 ohm balanced
Bandwidth:
Video: DC~60 MHz
Audio: DC~25 MHz
Distance:
Over Category 5e/6 UTP cable:
720p video, up to 500 feet (total length, device-to-
device)
1080i video, up to 500 feet (total length, device-to-
device)
Digital audio: up to 575 feet (total length, device-to-
device)
Green
Blue
Red
Orange
Green
Blue
Red
Orange
AV Cables
www.cablesforless.com Phone: 800-273-9556 Fax: 317-539-5625
052-122 MANUAL
052-122 extender (manual).indd 2
7/22/09 3:17:59 PM