5G CPE User Manual
Page 17 , Total 25
Network Mode:
used for setting current network mode.
2.
Management Network Settings
Bridge IP Address:
Bridge IP address obtaining way, separately static set and DHCP access
；
IP Address:
used for setting static IP address
；
Netmask:
used for setting netmask of static IP address
；
Gateway IP:
used for setting static gateway address
；
Primary DNS IP:
used for setting static main DNS address
；
Secondary DNS IP:
used for setting static backup DNS address:
MTU:
used for setting MTU, the default is 1500 bytes.
3.
LAN Network Settings
DHCP Server:
used for “enable” or “to enable” DHCP Server function, the default is “to enable”state
；
Range Start:
used for setting range start IP address of DHCP Server address pool
；
Range End:
used for setting range end IP address of DHCP Server address pool
；
Netmask:
used for setting netmask of DHCP Server address field
；
Lease Time:
used for setting lease time DHCP Server assigned address
；
DNS Proxy:
used for “enable” or “to enable” DNS proxy function.
3.4.2 WISP Mode
Setting of WISP Mode is shown as Figure 3-18.
