7. TROUBLESHOOTING
a. Ensure you are using quality multiple shielded cables with quality radial or
compression F-connectors. It is recommended Belden 9167 cable be used to prevent
signal ingress or egress.
b. Ensure the F-connector’s center conductor is making solid contact with the
CTADM-806a’s
RF Input, Audio Output, and Video Output
ports
.
c. Make sure the appropriate mode is selected using the
Mode Selector Button
.
d. If the CTADM-806a is not receiving power make sure the power cord is firmly
connected to the power source/outlet. Be sure the power source is properly rated to
handle the CTADM-806a load especially if other equipment is being powered by that
same source.
e. Further
troubleshooting
assistance can be found on-line at
www.cabletronix.com
in
addition to support from Cabletronix sales engineers at 1-610-429-1511.
This is a notice to inform you that content passing thru this device may contain strong
language or depictions of violence, sex or substance abuse. This unit contains no
parental control features. Parental discretion is advised.
6
