www.cabletronix.com
www.nacebrands.com
2. HDMI extender RX
1 Power led
LED is lit when powered
2 Data transmission led
Led blinks slowly when establishing connection
Led blinks fast when it is successfully connected and transmitting data.
3 Connection led
LED is lit when wireless signal is connected.
4 Power input
Connect with DC5V2A power supply
5 Reset
Press reset button to restart the device
6 HDMI output
Connect with HDMI display device
7 IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make sure the remote
control is within the required range of the IR receiver.
８Antenna
Transmits the wireless signal
6. Connection
1) Connect HDMI input with the HDMI source device and connect IR emitter extension cable to the IR OUT
interface of the sender (TX).
2) Connect HDMI output with the HDMI display device and connect IR receiver extension cable to the IR IN
interface.
3) Power on the device (power led lights)
4) Orient the antennas for the best signal link.
