3
www.cablematters.com
4x4 Matrix Switch
3. CONNECTION AND OPERATION
3.1 Installation Checklist
Please review these steps before installing the HDMI Matrix Switch
•
Power-off the source and display equipment before connecting
•
Matrix must be located within 4.5 feet of an electrical outlet
•
4K displays require 4K rated HDMI cables in the shortest length needed
•
Use high quality solid copper HDMI cables for the best performance
•
Certain cable set-top boxes may block replication of the signal
•
Test the Matrix and cabling before installing in a permanent location
•
Connecting an HDMI cable longer than 35 feet is not recommended
3.2 Front Panel Connections
1)
LED connection status screen
2)
IR sensor window
3)
POWER On/Off with green LED
4)
Panel LOCK button to prevent accidental switching
5)
OUTPUT: Display selection buttons A, B, C, D
6)
INPUT: Source selection buttons 1, 2, 3, 4
7)
PIP: Point-to-Point connects A-1, B-2, C-3, D-4
8)
ALL: Select all four displays and connect to a single input
9)
MENU: Display EDID settings
