3
www.cablematters.com
Wireless HDMI® Extender
3. Connection and Operating Instructions
3.1 Installation Checklist
Power off all equipment before connecting the cables
Line of site between the transmitter and receiver is required
Test placement of transmitter and receiver before installing permanently
Use high quality HDMI cables in the shortest length needed (2 are included)
AC outlet within 3 feet of source and output display (substitute a longer Micro-USB charging cable, if
needed)
Using a TV USB charging port for power to the units is not recommended
Rear ventilation vents on transmitter and receiver should not be blocked
Connecting through an HDMI splitter or switch may cause latency
HDMI IN:
Connects an HDMI cable from the Transmitter to the video source
Micro-USB POWER:
Connects the Micro-USB cable to the USB wall charger
Wake:
Quickly press the button to wake the Transmitter from sleep mode
Important Note
! Pressing this button will interrupt an active video signal for 15-20 seconds
Reset:
Press the button for 10 seconds to reset the Transmitter to factory default
3.2 Transmitter Panel Connections
