Cable Electronics DVP14, Инструкция по эксплуатации

Страница: 16 / 28

Setting
Use this button to configure the correct COM port for serial control,
and the device ID for identification.
Connect
Establish communications with the DVP14 and the computer.
Disconnect
Disconnect the computer COM port from the DVP14.
Input Resolution
Setting the resolution of the input port.
1. After 10 secongs, the new setting can be applied to the DVP14,
but the input source and Display layout mode will return to default.
2. Please reset input source and Display layout mode.
Main Source
Choose one of the inputs as the main source
Sub Source
Choose oneof the inputs as the sub source
Display Layout Mode
Configure the layout of the main and sub sources in the mixed video.
1. Main Full Screen: Only main source is displayed in the
mixed video output.
2. Sub Full Screen: Only sub source is displayed in the
mixed video output.
3. PIP Mode: The main source is displayed as the background,
and the sub source is placed in a window.
4. Side by Side: The main source and sub source are displayed
at the same size, side by side.
5. Custom Define PAP: User can adjust the layout of the two inputs
source to different sizes on the output.
Main and Sub source can be from the same input.
14