background image

 

Important Safety Instructions 

1.

 

Read and follow all warning notices and instructions marked on the product or included in the 
manual. 

2.

 

   Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the 

product and to protect it from overheating, these slots and openings must not be blocked or covered. 

3.

 

Do not attempt to service this product yourself, as opening or removing covers may expose you to 
dangerous high voltage points or other risks. Refer all servicing to qualified service personnel. 

4.

 

General purpose cables are used with this product for connection to the network. Special cables, 
which may be required by the regulatory inspection authority for the installation site, are the 
responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24 AWG line cord for 
connection to the Digital Subscriber Line (DSL) network. 

5.

 

When installed in the final configuration, the product must comply with the applicable Safety 
Standards and regulatory requirements of the country in which it is installed. If necessary, consult 
with the appropriate regulatory agencies and inspection authorities to ensure compliance. 

6.

 

A rare phenomenon can create a voltage potential between the earth grounds of two or more 
buildings. If products installed in separate buildings are interconnected, the voltage potential may 
cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this 
phenomenon exists and, if necessary, implement corrective action prior to interconnecting the 
products. 

7.

 

In addition, since the equipment is to be used with telecommunications circuits, take the following 
precautions: 

 

Never install telephone wiring during a lightning storm. 

 

Never install telephone jacks in wet locations unless the jack is specifically designed for wet 
locations. 

 

Never touch uninsulated telephone wires or terminals unless the telephone line has been 
disconnected at the network interface. 

 

Use caution when installing or modifying telephone lines. 

 

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a 
remote risk of electric shock from lightning. 

 

Do not use the telephone to report a gas leak in the vicinity of the leak. 

 

Customer Support 

If you require assistance with your modem, call our toll-free number: 800-5555. 
 
 
 
 
 

 

*6205-A2-ZZ42-00* 

*6205-A2-ZZ42-00* 

12                                                                      December 2005                                                      6205-A2-ZZ42-00 

Содержание 6205













Отзывы: