Page 2
►
Items Quantity
►
General Instructions:
Thank you for
purchasing
a Cabinets To Go product. You are now the proud owner of a high quality product designed
to face the test of daily
use and guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly, please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any
responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in
defects, malfunctioning parts, significant
damage and/or injury.
Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist.
Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling
location. Cabinets To Go will
not be held responsible for failure to follow these instructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE
QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT CUSTOMER CARE IMMEDIATELY AT
1-800-CABINET.
►
Required tools:
Tools Required: Phillips Screwdriver
Optional Tools: Electric Drill
Optional Tools: Rubber Mallet
►
Hardware Box
:
a
b
c
d
Qty 4
Q ty 8
Qty 6
Qty 4
Item
Description
Qty
A
Face
Frame
with Door
1
B
Side Panels
2
C
Top
& Bottom
Panel
s
2
D
Back Panel
1
E
Hardware
Box
:
1
"L" brackets
4
pcs,
1/
2
" flat head screws
8
pcs,
1"
flat head
screws
6
pcs
,
2
" flat head screws 4pcs
,
e
Qty 4
plastic wall anchors 4pcs
, rubber bumpers 2-4pcs
f
Qty 4
A
A
B
B
D
C
C
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.