Page 2
Item
Description
Qty
A
Face Frame with Doors and Drawer Face
1
B1 B2
Left Side Panel B1 & Right Side Panel B2
2
C
Bottom Panel
1
D
Back Panel
1
E1 E2
Left Rear Side Panel E1 & Right Rear Side Panel E2
2
F
Toe Kick
1
G
Hardware Box:
Round Buttons 4pcs, Plastic corner bracket 2pcs, 1/2" round head screws 4pcs, 1" screw 3pcs, metal corner braces 4 pcs, 1/2" flat head screws 8pcs
►
Items Quantity:
►
General Instructions:
►
Required Tools:
Tools
R
equired:
Phillips S
crewdriver
Optional Tools
:
E
lectric
D
rill
Optional
Tools: Rubber Mallet
a
b
c
d
Qty
4
Q ty
2
Qty
4
Q
t
y
8
►
Hardware Box:
B1
D
E
1
E
2
B2
A
A
A
A
F
C
f
Qty
3
e
Q
t
y
4
Thank you for purchasing a Cabinets To Go product. You are now the proud owner of a high quality product designed
to face the test of daily use and guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly, please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in defects, malfunctioning parts, significant
damage and/or injury.
Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist.
Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling location. Cabinets To
Go will not be held responsible for failure to follow these instructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL
THE PARTS IN THE QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT
CUSTOMER CARE IMMEDIATELY AT 1-800-CABINET.
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.
