L
E
L
►
Instructions:
1 .
Place the face frame
( A)
face down on a flat soft working surface to ensure that the face is
notscratchedordamaged
( Figure 1 )
.
2.
Installing the Side Panels ( Figure 2 ) :
Insert right and left side panels
( B)
into the grooves
of the face frame
( A)
and align the cam lock connectors
( Figure 2 ) .
Lock the cam with a
screwdriverbyturningthe screw1 8 0 ° degreesclockwise
( Figure4 )
.
3 .
Installing the Bottom ( Figure 3 ) :
Gently spread the side panels and insert the bottom
( C) & ( D)
into thegrooves ofside panel
( B)
until it touches the face frame
( A) .
Align it and lock each
cam .
4 .
Installing the Back Panel and Toe Kick ( Figure 5 ) :
Before you start this step, put the
back panel
( E)
on a flat surface facing upward. Install the drawer rail holders
( L)
in the pre-
spotted area on the back panel
( Figure 6 ) .
The opening of the holders should be facing
oa ha
er. Secure them with 2 round head screws
Figure 6 ) .
Then put the back panel
( E)
at
rear of side panel
( B) ( Figure 5 )
. Align and lock each cam lock. Install the Toe Kick
( G)
by
locking the cam lock at both ends
( Figure 5) .
5 .
InstallingtheDrawerSlideRails: Insert the drawer side rails backend into the
holder ( L)
previously installed
( Step 4 )
on the back panel . Then secure the drawer rail front
end with 1 / 2 ” screws using the pre- drilled holes in the face frame . ( Repeat this step for
more drawers. ) .
6 .
Drawer Assembly ( Figure 7 ) : Firstly
assemble the drawer front( H) with drawer box front
by screws. And then assemble the rest parts of drawer box ( I)
(Repeat this step for more drawers).
E
H
I
Figure7
7 .
Installing the Corner Braces ( Figure 8 ) and inserting the Drawers:
Place the corner
braces ( K) on each top corner of the cabinet and secure them with the ½ ” Corner Brace Screws.
Slide the drawers into the rail and check the drawer position
G
L
8
Page 3
Figure2
Figure3
Figure 1
