JUST SPEAK EVO
5
English
3. GETTING STARTED
Installing the JUST SPEAK EVO on Your Helmet
1. Peel off the hook fasteners for the speakers and attach them on the
back sides of the speakers.
2. Attach the loop fasteners for the speakers in the deep ear pockets of
your helmet.
3. Place the speakers in the helmet along with the hook and loop
fasteners, centered to your ear.
4. Locate a suitable surface on the left side of your helmet to attach
the unit, clean the location with a moistened towel, and allow to dry
thoroughly.
5. Peel off the adhesive tape covers of the control unit and attach it on
your helmet.
6. Attach the hook and loop fastener for the boom microphone between
the internal helmet cheek pad and the internal wall of the helmet
shell. Place the attachable boom microphone on the hook and loop
fastener and attach the microphone connector to the 2 pin connector
of the main unit cable. The microphone should be mounted so it is
positioned close to your mouth when you are wearing the helmet.
7. Hide the wire under the helmet padding after the installation.
1
2
