Page 4
SET-UP INSTRUCTIONS
5. Your shelter should be standing up completely
(Photo 6).
Anchor the shelter to the ice by using the provided ice
anchors and straps.
Screw two or more ice anchors into the ice several feet
away f rom the shelter using Clam
’s Ice Anchor Installation
Tool PN 108348 (not included). Use the provided anchor
straps found in the pockets under each side wall hub to
secure the hubs to an anchor, and the adjustment slide on
the strap to achieve proper tension. Next, screw two
anchors through the windward corner shelter grommets
completely. This will help keep the shelter in place. If
more anchors are needed, order PN 108064 (pack of two)
via www.clamcorp.com.
Photo 6
TAKE-DOWN INST RUCTIONS
TAKE-DOWN INSTRUCTIONS
1. Close all windows. Leave one or both doors open to allow
air to escape.
2. R emove ice anchors and store them in the provided
pouch. In windy conditions, remove ice anchors and straps
prior to collapsing the roof and walls.
3. Push the center hub on any wall until it collapses inward
(Photo 7).
Continue pushing each wall inward until all the
walls are collapsed. The shelter will fall to the ice on its
own.
4. Push the hub of the roof (yellow loop) down
until it collapses.
5. The shelter will now be flat. Gather all corners of the
shelter and fold together
(Photo 8).
Do NOT force the
shelter when folding! W atch for entanglement of poles
(Photo 9)
.
6. Place the folded shelter and the ice anchor/rope pouch
back into the carrying case with the hubs toward the bottom
end of the bag.
Make sure your ice shelter is completely dried out after
each use and before storing. Store your ice shelter in a
cool, dry place. Keep away from rodents.
Photo 7
Photo 8
Photo 9
Tangled
Untangled
