SET-UP INSTRUCTIONS
Photo 5
Your shelter should be standing up completely
(Photo 5).
nchor the shelter to the ice by using the provided ice
chors and straps.
crew two or more ice anchors into the ice several feet
way from the shelter using Clam
’s Ice Anchor Installation
ol PN 108348 (not included). Use the provided tie ropes
tie the hub eyelets to an anchor, and the adjustment
de on the strap to achieve proper tension. Next, screw
o anchors through the windward corner shelter
5.
A
an
S
a
To
to
sli
tw
grommets completely. This will help keep the shelter in
place. If more anchors are needed, order PN 108064
(pack of two) via www.clamcorp.com.
TAKE-DOWN INSTRUCTIONS
TAKE-DOWN INSTRUCTIONS
1. Close all windows. Leave one or both doors open
to allow air to escape.
2. Store all tie ropes, remove ice anchors and store
them in the provided pouches or in the carry bag side
pocket. In windy conditions, remove ice anchors
after collapsing the roof and walls.
3. Push the center hub on any wall until it collapses
inward
(Photo 6).
Continue pushing each wall
inward until all the walls are collapsed. The shelter
will fall to the ice on its own.
4. Push the hub of the roof panels (yellow loops)
down until they both collapse.
NOTE: The yellow looped hub (roof) gets
deployed FIRST on set-up and collapsed LAST
on take- down.
5. The shelter will now be flat. Gather all corners of
the shelter and fold together
(Photo 7).
Page 4
Photo 6
Photo 7
