10
11
OPERATION and CONTROLS
Press
MENU
button
to select the
menu item you
want to adjust.
POWER
ON/OFF
Press
or
Buttons
to
CHANGE THE SETTING
of the active menu item.
The active menu item is
the Highlited line on the
left side of the display.
Press
or
Buttons
to
CHANGE THE SETTING
of the active menu item.
The active menu item is
the Highlited line on the
left side of the display.
HOW TO WORK THE CONTROLS
POWERING UP
Press
• The detector always starts up with the DISCRIMINATION feature
active.
Motion is required to detect metal.
• Sensitivity is at 70% of maximum
• All target categories are illuminated, meaning that all metal objects
will be detected.
OPERATION and CONTROLS
MENU SELECTIONS
1. DISC
Use
and
to increase or decrease DISCRIMINATION level.
Each time you press
, a target category is eliminated from detection.
Elimination occurs from left to right. When a category description (for
example “IRON”) disappears from the display, then targets classified in
that category will not be detected.
Pressing
reverses the discrimination process. With each press of
, a category description will reappear, indicating that targets
classified in that category will again be detected.
Discrimination is a cumulative elimination system. Targets can be
eliminated from left to right on the scale, with each additional press of
, resulting in more objects being eliminated from detection.
2. NOTCH
Press
until “NOTCH” is illuminated on the display.
Use
and
to notch target categories IN or OUT while the NOTCH
line is highlighted.
Whereas the discrimination feature eliminates all categories sequentially
from detection, the NOTCH control allows you to selectively include or
exclude target categories from detection.
With each press of
or
, the notched category moves across the
display screen. As you move the position of the notched category, you
are
changing the detection status of the selected category.
• If a target category was previously eliminated (word not visible)
then notching that category will return it to detection.
• If a target category was previously retained (word is visible) then
notching that category will remove it from detection.
Only one target category at a time can be selected for notching. To notch
multiple categories in or out, press
again while NOTCH is
highlighted. Each subsequent press of
allows you to set an additional
notch. Each time you press
, followed by
, the notch
program will begin by changing the status of the IRON segment.
At any time, the display screen indicates the current category notches or
discrimination settings. Any category whose description is not visible will
not be detected.
