GU
GET
AW
AY CABIN 8
ASSEMBLY
STEP 1 - GETTING STARTED
CABELA’S TENTS ARE EASY TO ASSEMBLE AS LONG AS YOU READ THE INSTRUCTIONS CAREFULLY AND AVOID EXCESSIVE
FORCE TO ANY PART OF THE TENT OR POLES.
Lay the tent body flat with the door facing you.
Loosely stake out the four corners.
(Note: Insert all stakes into the ground at a 45˚ angle facing
away from the center of the tent.)
STEP 2 - POLE ASSEMBLY
Assemble all the poles before beginning. Run the black
fiberglass poles through the sleeves with matching color
tabs.
Run the gray fiberglass pole through the front to back
sleeve with gray tabs.
Insert the ends of all fiberglass poles into the splined
opening of the angled connectors.
STEP 3 - TENT-BODY ASSEMBLY
Starting at A1 and B1, insert black metal pole into the
smooth opening of the angled connector.
(Note: One end of the metal poles will have a smaller
opening to fit over the corner pins.)
Carefully lift poles and secure on corner pins. Attach clips
to pole as you set them. Repeat step at A2 and B2, then
repeat with gray center poles.
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. CALL FOR ASSISTANCE 1-800-237-4444 OR VISIT WWW.CABELAS.COM
5
45
