Cabela's 4BGGBP, Инструкция по эксплуатации

Страница: 3 / 10

You must rst install the batteries which are located in the front protective styrofoam.
Batteries included: 4 AAA batteries
To replace the batteries,remove the cover by pressing the tab
and turning as shown in the illustration (counter clockwise).
Install new battery and align cover and install cover
(clockwise).
NOTE: Press the scanner with a recorded fingerprint. If the green and red indicator lights
flash together, it indicates low battery. Please replace with 4 new AAA alkaline batteries.
BATTERY INSTALLATION AND REPLACEMENT BATTERY INSTALLATION AND REPLACEMENT
OPENING THE SAFE
Place any finger on the scanner and turn the handle clockwise.
RECORDING YOUR FINGERPRINTS
NOTE: When you first receive your safe there are no recorded
fingerprints. Any fingerprint will open the safe until a fingerprint is
recorded. You can record up to 20 different fingerprints for opening
the safe. If you enter more than 20 fingerprints, the red light will
flash 5 times with 5 beeps, which indicates you cannot record a
new fingerprint.
1. Press the red reset button located inside the safe under scanner
light off, then release it, the scanner will turn white with 2 beeps
and the green light flashes twice. You will need to record your
finger 3 separate times for it to record.
2. Place your finger on the scanner until there is 1 beep and the
green light flashes once. Lift your finger off the scanner.
OPENING THE SAFE
2
B-LOCK
TAB