24
25
Replacement of the CR-2025 type battery in the Stream remote control: loosen the screw,
remove the rear lid, remove the old battery and load the new battery properly with the "+" side
on the clasp side, put the rear cover back on, retighten the screw.
CHECKING FOR TV SOUND
Plug one end of the power cord in the POWER connector at the back of the Stream BASE and the
other end into a live AC outlet. Stream BASE is ready to use as soon as the LED of the front display
turns red. Press the ECO on/off key of the remote to power the Stream BASE on. The LED turns
green, the screen displays "ON" followed by the name of the selected input.
Note: the DLNA fonction for Wi-Fi / Ethernet (WLAN/LAN) network use of Stream BASE is activated
when the PWR power LED at the back of Stream BASE has turned from red to green, around 40
seconds after having powered the Stream BASE on.
TV being on, select the Stream BASE input connected to the TV by pressing the key 3 of the
remote until the screen displays the name of the input connected to the TV:
- "OPT" for the optical input
- "AUX" for the analog input
VOLUME : use keys 5 (-) and 7 (+) to adjust the sound level.
4
POWERING ON THE REMOTE CONTROL
Before first use, loosen the screw (PH00 screwdriver), remove the back cover, remove the
battery protection tab, replace the cover, retighten the screw.
5
StreamBASE_manual_v18.indd 25
8/30/2016 5:20:18 PM
Содержание Stream BASE
Страница 1: ...Notice d installation Owner s Manual ...
Страница 38: ...e n g l i s h 38 ...
Страница 39: ...39 ...