10
11
3 - CONNEXION MANUELLE
avec un ordinateur, un smartphone
ou une tablette.
a) Mettre le Stream 1 sous tension et ouvrir la fenêtre configuration
réseau wifi de l'ordinateur (ou smart phone, tablette):
b) Sélectionner Stream 1 parmi les réseaux disponibles et demander
la connexion.
c) Une fois la connexion établie, ouvrir votre navigateur Internet,
entrer : http://192.168.0.1 dans la fenêtre et valider.
d) Choisir parmi les réseaux disponibles celui
correspondant au serveur à connecter avec le
Stream 1 (ici "Belkin221")
3 - MANUELLE VERBINDUNG
mit einem
Computer, einem Smartphone oder einem
Tablet:
a)Schalten Sie das Stream 1 ein und öffnen
Sie das Netzwerk-Konfigurationsmenü Ihres
Computers (oder Smartphone/Tablets).
b) Wählen Sie Stream 1 aus den verfügbaren
Netzwerken aus und initiieren Sie die
Verbindung
c) Ist die Verbindung hergestellt, öffnen Sie ein Internet-
Browserprogramm und geben Sie in dessen Adresszeile ein:
http://192.168.0.1
d) Wählen Sie aus den verfügbaren Netzwerk dasjenige mit dem
Router aus, mit dem das Stream 1 verbunden werden soll (hier
"Belkin 221")
e) Entrer et valider le mot de passe fourni avec le
serveur: la diode "wifi configuration" clignote.
e) Geben Sie das Passwort für den Router ein und
bestätigen Sie es. Die "Wifi Configuration"-LED
blinkt.
f) La connexion est établie quand la diode
passe au bleu fixe. Stream 1 fait maintenant
partie de votre réseau wifi. Fermer le navigateur
et continuer à la page 16 par l'installation de
l'application Cabasse.
f) Die Verbindung ist hergestellt, wenn die blaue
LED aufhört zu blinken und kontinuierlich
leuchtet. Das Stream 1 ist nun Teil Ihres
drahtlosen Netzwerks. Schließen Sie das
Browser-Programm und installieren Sie die
Cabasse-App wie auf Seite 34 beschrieben.
f) The connection is completed when the blue
LED stops flashing but remains on. Stream
1 is now part of your wireless network. Close
the browser and jump to page 25 for the
install of the Cabasse application.
F
.连接完成后,蓝色
LED
显示灯停止闪烁
并保持长亮。
Stream 1
主机现在已经成为了无线网络中
的一部分。
关闭浏览器,并参看第
43
页安装
Cabasse
应
用程式。
e) Enter and validate the pass word for
the router : the “wifi configuration” LED
flashes.
E
.输入路由器的安全密码并确定:
“无线
Wifi
设置”
LED
显示灯会闪烁。
3 - MANUAL CONNECTION
with a computer, a
smartphone or a tablet:
a) Turn Stream 1 on and open the wi-fi network
configuration window of the computer (or
smartphone, tablet).
b) Select Stream 1 among the available networks and
ask for connection.
c) Once the connection is completed, open a web
browser, enter and validate in the search
window: http://192.168.0.1
d) Select among the available networks
the one of the router to be connected to
Stream 1 (here "Belkin 221")
3.
与带无线
Wifi
功能的电脑、智能手
机或平板电脑进行手动连接:
A
.打开
Stream 1
主机,启动电脑(或
智能手机、平板电脑)的无线
Wifi
网
络设置界面。
B
.在可用的网络设备中选择
Stream 1
主机,并且发起连接请求。
C
.连接完成后,打开浏览器視窗,在地址栏输入
http://192.168.0.1
并并按键确认。
D
.在可用的网络中选择
Stream 1
主机需要连接的
路由器
(此例显示为“
Belkin 221
”)。
ATTENTION !
Une mise à jour du logiciel du Stream 1 peut
démarrer automatiquement dès qu'une connexion au réseau internet
est réalisée. la diode
9
passe au blanc et clignote jusqu'à la fin de
la mise à jour. Le Stream 1 n'est pas fonctionnel durant cette phase jusqu'au
redémarrage en mode ECO, diode
9
rouge fixe. Appuyer sur la touche
1
pour passer en mode actif et utiliser Stream 1.
Ne pas éteindre ou déconnecter le Stream 1 durant les mises à jours qui
peuvent durer jusqu'à 15 minutes.
CAUTION!
An automatic update of the firmware might start
as soon as Stream 1 is connected to the Web. The
9
LED turn
to white and flashes for 5 to 15 minutes until the update is fully
completed.
Do not try to use Stream 1 during the update, wait until Stream 1 has restarted,
when
9
LED is steady red. Press
1
to turn the Stream 1 on and carry on.
Do not shut down or unplug Stream 1 during updates.
ACHTUNG!
Ein automatisches Update der Firmware könnte
beginnen, sobald das Stream 1 mit dem Internet verbunden wird.
Die
9
LED wechselt zu weiß und blinkt für 5 bis 15 Minuten, bis
das Update vollständig abgeschlossen ist.
Versuchen Sie nicht, das Stream 1 während des Updates zu benutzen, sondern
warten Sie, bis das Stream 1 einen Neustart durchgeführt hat und die
9
LED
kontinuierlich rot leuchtet. Betätigen Sie
1
, um das Stream 1 einzuschalten.
Nun können Sie das Stream 1 benutzen.
Trennen Sie das Stream 1 während eines Updates nicht vom Stromnetz und
schalten Sie es nicht aus.
注意!當
Stream 1
被連接到家用Wi-Fi網絡後,固件的升級
更新將自動啟動。
9
LED
顯示燈將顯示為白色閃爍
5
到
15
分鐘,直到更新全部完成。
在更新過程中,請暫停使用
Stream 1
,請等待
Stream 1
自動重新啟動
後,當
9
LED
顯示燈顯示為紅色常亮。按
1
鍵啟動
Stream 1
即可。
請不要在更新過程中關閉或截斷
Stream 1
的電流供應。
Содержание Stream 1
Страница 1: ...notice d installation owner s manual betriebsanleitung 用户手册 STREAM 1 ...
Страница 2: ...f r a n c a i s e n g l i s h d e u t s c h 中文 2 ...
Страница 47: ...47 ...