14
14
2.5
Separation and Connection of the Scan Head
!
Attention!
Before separating the connecting cable disconnect the device from the mains and make sure the device
is placed in a clean, dry and dust-free environment.
1
2
3
5
6
4
7
Figure 4
Separation and connection of scan head
Separation
Release screw connections of connectors (2) and disconnect the plug (4).
Release screw (3) on the clamp (6).
Carefully draw collimator (5) out of the scan head housing (7).
!
Attention!
Protect collimator and components being accessible by opening the scan head against dust, dirt,
moisture and mechanical damage.
Connection
Proceed in reversed order for connection.
