12
12
2.3
Unpacking and Setting-up
When delivered, the marking laser is fully assembled, i.e. control and scan head are linked with each other.
!
Attention!
Potential damage of the device.
Do not bend the connecting cable, be aware of the minimum bending radius of 80 mm
Consider the limited length of the connecting cable
Do not pull at the connection of the connecting cable
Do not place the scan head on the lens
Unpack the device and set it up.
• Scope of delivery includes four feet to set up the devise on a plane surface. The feet can be screwed on the
bottom side of the control.
• The scan head has bores for the assembly on for example a stand.
!
Warning!
Danger of unfocused and hazardous laser radiation exposure without having assembled the scan head.
Only operate the device with the scan head assembled on a fixed bracket.
After the scan head has been assembled remove the lens cover and keep it safe.
Keep the packaging for a safe return in the event of repair or forward dispatch.
