![background image](http://html1.mh-extra.com/html/cab/ps11/ps11_assembly-instructions-manual_3054705007.webp)
7
4
Operation
4.1 General Settings
Activate the peel-off mode in the software.
In direct programming use the "P" command.
Programming Manual of the printer.
Configure the peel-off parameters.
4.2 Setting the Operation Mode
!
Attention!
Before setting the operation mode switch off the printer.
Set the operation mode with the switch (1).
1
Upper switch position
Automatic mode
Lower switch position
Label on demand mode
Figure 4 Setting the operation mode