CAB EOS4, Руководство по настройке

Страница: 31 / 48

30 31
5 Test Functions
5.6 WiFi Status

Access only when a WLAN adapter is installed!
The WiFi status function prints out a list the most important parameters of the accessible Wireless Access Points.
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.

Insert printable medium (labels, endless paper) which extends across the entire printing width.

If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.

Start Offline menu.

Select Test > WiFi status .
The printout can be cancelled with .
WiFi status
Mon Jan 21 07:49:49 2013
EOS1/300
Firmware V4.13 (Jan 15, 2013) - #170113310794
Channel Name/BSS ID Signal level Encryption
1 default
●●●●●
WPA-PSK-TKIP
00:24:b2:36:98:60
1 cab-firma
●●●●●
WPA-PSK-TKIP
00:24:b2:36:98:61
1 cab-gast
●●●●●
WPA-PSK-TKIP
00:24:b2:36:98:62
11 default
●○○○○
WPA-PSK-TKIP
00:24:b2:36:98:60
11 cab-firma
●○○○○
WPA-PSK-TKIP
00:24:b2:36:98:61
11 cab-gast
○○○○○
WPA-PSK-TKIP
00:24:b2:36:98:62
Fig. 16 WiFi status
The parameters have the following meaning :
Column Meaning
Channel Channel; frequency range of the Access Point
Name/BSS ID Name of the wireless LAN
MAC address of the Access Points
Signal level Scale of the WiFi signal strength
Encryption Type of data encryption
Table 15 Parameters of the WiFi status